Skip to main content

Confederate Motors to close, reopen with new name and electric motorcycles

Confederate Motors closing
Image used with permission by copyright holder
The company name no longer works so the company will close. Birmingham, Alabama-based Confederate Motors is going out of business, reports Asphalt and Rubber. After an undisclosed dark period, a new company called Curtiss Motorcycles will introduce high-performance electric motorcycles.

Founded in 1991 by attorney H. Matthew Chambers, Confederate Motors is today, and soon will have been, a boutique motorcycle company known for extremely high-powered, big V-twin motorcycles. The official Confederate Motors closing will occur when the single last remaining P51 Combat Fighter is sold.

According to Asphalt and Rubber, Chambers told the Los Angeles Times the Confederate name had become a political liability. “I think we lost a lot a business with that name,” Chambers said. “We’ve missed out on branding opportunities. So, it’s time to retire it.”

The remaining P51 Combat Fighter is the Black edition. All Blonde editions have already sold.

The P51 is made entirely made from carved solid billet blocks of military-grade aluminum for robustness and fatigue-resistance. The bike’s 7-inch frame backbone also serves as the fuel tank with a 3.75-gallon capacity.

Powered by a 132-cubic inch (2,163cc) 56-degree air cooled V-twin engine, the P51 produces 145 hp at 5,100 RPM and 160 pound-feet of torque at mind-boggling low 2,000 RPM.

The rated 160 mph top speed was proved earlier in August when, according to Confederate’s website, the P51 ran 164.93 mph on “very slippery salt.”

The P51 uses adjustable monoshocks front and rear, double wishbone in front and cantilevered in the rear.

Weighing in at 560 pounds with fuel and fluids, the P51 has a 62.5-inch wheelbase and 29.5-inch seat height. There’s a 19-inch carbon front wheel with a 120/70XR19 tire and a 17-inch carbon disc rear wheel wearing a 240/45XR17 tire.

Curtiss Motorcycles is named for Glenn Curtis, an early aviator who also built and raced motorcycles. Curtis competed with the Wright Brothers. Curtis was dubbed the “Fastest Man on Earth” in 1907 after he rode a V8-powered Hercules motorcycle built by his company 136.3 mph in a measured mile at Ormond Beach in Florida.

The first electric model from the new Curtiss Motorcycle, suitably called the Hercules, is reported to be based on a low, sporty cruiser design and will have two Zero Motorcycles electric motors. Early estimates are the electric ride will pump out 175 hp and pull 290 pound-feet of torque. Chambers has not announced an expected release date or where it will be built.

Editors' Recommendations

Bruce Brown
Digital Trends Contributing Editor Bruce Brown is a member of the Smart Homes and Commerce teams. Bruce uses smart devices…
General Motors and Volkswagen are ignoring hybrids to go full electric
A 2019 Chevrolet Volt on the road.

It's always important to know when to pick your battles. Automakers are working to lower emissions in order to meet stricter regulations, but they're not all following the same strategy. While many automakers plan to use a mix of hybrids and all-electric cars, General Motors and Volkswagen will skip hybrids in order to focus on going fully electric, according to The Wall Street Journal.

That's largely due to the massive amounts of money GM and VW plan on investing in all-electric cars. GM has said it will launch 20 all-electric models by 2023, including U.S.-market models for Chevrolet and Cadillac. VW has planned a family of electric cars based on its new MEB platform, including a reincarnated Microbus that's due in 2022. The German automaker is also launching numerous electric cars under its other brands, including Audi and Porsche.

Read more
Workhorse could give a castoff GM factory new life building electric trucks
Workhorse W-15

In November, General Motors announced a culling of vehicle models and facilities. But now one of the factories set to be sidelined could get a new life with a different company. GM is in talks to sell its Lordstown Complex in Ohio to Workhorse Group, which is interested in using the factory to build electric trucks.

Lordstown previously built the Chevrolet Cruze, but the last of those cars rolled off its assembly line in March. The factory was "unallocated," meaning GM planned to close it down rather than replace the Cruze with another model. Workhorse, or rather a consortium led by the company's founder, is now working to buy the factory. That would preserve local jobs and help GM save face. While the company recently announced new investments and added jobs at other Ohio facilities, it has been widely criticized for idling so many workers as it closes factories and trims its vehicle lineup. The cuts are ostensibly aimed at freeing up funds for things like electric vehicles -- exactly what Workhorse plans to build at Lordstown.

Read more
Rivian R2 vs R1S: How will Rivian’s cheaper SUV compare?
The front three-quarter view of a 2022 Rivian against a rocky backdrop.

Rivian has finally unveiled the R2, its long-awaited attempt at a more affordable electric SUV. The new vehicle may not be available just yet, but fans of Rivian's design aesthetics and feature set are already looking forward to being able to order the new car. The R2 is targeted at being a more affordable take on the electric SUV and will sit alongside the flagship-tier R1S.

Let's get this out of the way right now: The R1S is most likely going to be a better vehicle than the R2. Rivian isn't replacing the R1S with the R2 — it's releasing the R2 as a more affordable alternative, and there will be some compromises when buying the R2 over the R1S.

Read more